1, Aluminum extrusion profile
2, Aluminum alloy: 6000 series
3, Deep processing: drilling, punching, milling, accurate cutting, CNC, assembly line work etc
4, All kinds of surface treatment: anodizing, electrophoresis, powder coating, wooden printing, sandblasting, matte, dye, small anodizing, polishing, brushing etc
5, Focus on quality for 16 years
6, Have 16 years experience of product development, design and service
General Chemical of alloy
Alloy | 6063(%) | 6063A(%) | 6061(%) |
Si | 0.2-0.6 | 0.3-0.6 | 0.4-0.8 |
Fe | <0.35 | 0.15-0.35 | <0.7 |
Cu | <0.1 | <0.1 | 0.15-0.4 |
Mn | <0.1 | <0.15 | <0.15 |
Mg | 0.45-0.9 | 0.6-0.9 | 0.8-1.2 |
Cr | <0.1 | <0.05 | 0.04-0.35 |
Zn | <0.1 | <0.15 | <0.25 |
Ti | <0.1 | <0.1 | <0.15 |
Other single | 0.05 | 0.05 | 0.05 |
Other | 0.15 | 0.15 | 0.15 |
Mechanical Properties of Section under room temperature
Alloy | State | Tensile strength test | Hardness test | ||||
Tensile strength |
Specified non-proportional elongation stress |
Elongation | thickness of sample | HV | HW | ||
% | mm | HV | HW | ||||
No less than | |||||||
6061 | T4 | 180 | 110 | 16 | - | - | |
T6 | 265 | 245 | 8 | - | - | ||
6063 | T5 | 160 | 110 | 8 | 0.8 | 58 | 8 |
T6 | 205 | 180 | 8 | - | - | - | |
6063A | T5 | 200 | 160 | 5 | |||
T6 | 230 |
160 |
5 |
Yes,we can.Do not worry about the quantity,any small order quantity is always best welcome.You can feel free to choose and confirm your need order quantity.We will provide different production ways based on your quantity.
Of course yes,we are a professional manufacturer,so we could supply the best competitive price without any middlemen.I will try my best to supply you lowest prices.
All 6000 series of profiles are available and T4/T5/T6 are also manageable.
Largest extrusions:400mm.
Anodized profiles max. length:6.6 meter.
Powder coated profiles max. length:6.6 meter.
Yes,we do.We can provide drilling/punching/milling/accurate cutting/CNC/assembly line work etc.
We accept T/T,L/C,Western Union.
We have a powerful QC team to control the quality in every production process.We believe the best quality is our enterprise life.
Normally new die mould and sample about need 7-10 days.1×20 or 1×40 container order quantity about needs 15-25 days.But we will try our best to supply you according to your need time.
Our passion for supporting creativity and consistent efforts to make a difference allows us to achieve continuous development and innovation.
We are committed to continuing our efforts to make our world better .
Tel:+86-51086226112
Email: crystal@aluminumds.com
Add:No. 17, Donglin Road, Zhouzhuang Town, Jiangyin, Jiangsu, China